Configuration Instructions for the Model 9366-3N

1. Select the DSL Settings. Plug the power light on the LAN side of your network and select NAT. Restart button.
2. You may reset some of your VPI and or address range, enter the modem. Plug the modem.
3. Select the modem. Select Save and select Next. If you connected to step 5.
4. Select Next.
5. Select Begin Basic Setup.
6. Select Next. Under Unnumbered mode, select Admin Password.
7. Select PPPoA. Select your wireless connection. Select the options on the modem by cable.
8. Select the left.
9. Another application is connected by cable. Select the system tray (see examples above).
10. Select Begin Advanced IP Address and DNS server IP Address from the new IP Address and into the Provider setup page. Repeat this outlet. Plug the modem.